Instructions for Use Emergency Light Fitting Surya4 Jun 2014
1 . Turn the light switch to a state of ” AC ” and insert fitting into the E - 27 ( AC110-220V/50-60Hz ) and then turn the source of electric current , the indicator light will turn on , while the LED turns off and is in charging conditions . In this condition the remote control will not work . When the current source is disconnected , the LED light will turn on automatically and in this condition the remote control can be used .
2 . Turn the light switch to the condition of ” DC ” and insert fitting into the E - 27 ( AC110-220V/50-60Hz ) , and is not connected with an electrical current . Under these conditions the LED lights will be lit , and can be used as an emergency light . in this condition the remote control can be used .
3 . Turn the light switch to state ” OFF ” and insert fitting into the E - 27 ( AC110-220V/50-60Hz ) and then turn the source of electric current , the indicator light will turn on . Lights will only be in the condition of charging only. Full charging takes 8 hours .
Use a large capacity battery re- charge the lead - acid 4V 1800mAh
Using a durable battery , can re - charge more than 200 times
Equipped with a long lasting LED , very bright and energy efficient
LEDs are energy-efficient lighting with long light
Features turn on automatically ( Auto On )
Dimensions : 12 x 12 x 10 cm
Please use E27 fittings
We are fully re- charge before the first use of the full kali.Pengecasan
takes 8 hours
Please do not let the light in a long time and should be in -
cas 8 hours every three months . Otherwise , it will affect the lawyer
use of lights
We are in - charge after the LED lights begin to dim . Otherwise, can affect
Please do not illuminate the eyes directly , affects visions
Should not be used during charging
Do not be left exposed to rain or dew
Three months quality guarantee of our products from the date pembelian.Tidak including damage caused by misuse